ARL 500 Panel
Compliance to Standards
En 81/1-2+A3
Number of Stops
48 Stops
Control Type
Single Button Pickup
Double Button Pickup
Drive Type
Double Speed, Hydraulic, VVVF
Elevator Speed (Maximum)
2,5 m/s
Group Control
8
Serial Communication
With Floor and Cabin
Cabin Position Information
Magnetic Switches
Encoder System
Automatic Door Control
Single Door
Double Door
Door Bridging
Available
Display Outputs
7 Segments
Gray / Binary Code
LCD Display
Language Options
Turkish, English, Russian, Dutch, Polish, Swedish, French, Italian
Advantages of Using the ARL 500 Panel System
Door Control
Door Control
- Any kind of automatic door control
- 1 piece of door control inputs and outputs in the revision box, 2 in the control panel
- Early opening of door and door open level renewal by door bridge circuit on the control card
Motor-Phase Protection
Protection Systems
- Ready inputs / outputs on the control board and motor protection
- Leakage current protected cabin and well feed fuses
- Special connections for safety circuits in the control panel, revision box and downhole box
- Well lighting control with pulse current switch (with buttons from the top of the cabinet and from the bottom of the well)
- Door control independent of stops with double door support
- Serial cabinet communication via CANbus line
- One-to-one connection with the plug-in flat cable between the control panel and the revision box
- Plug-and-play connection between cabinet operation panel and revision box with plug-in single cable
- Serial communication via CANbus line
- Well CANbus line extending along the whole well, with plug cables from floor to floor
- Plug-in connection with plug-in cable attached to the CANbus line for each floor well for floor control panel
- Door contact installation extending along the whole well, with plug cables from floor to floor
- Connection with plug-in cables for floor-to-door contact installation for floor door plug- lock contacts
- Plug-in connection with downhole box via single cable
- Integrated AKUS-SD chip in the panel
- Emergency lowering system (for hydraulic elevators) with ARL-SARJ card and 2 12V battery additions
- Special test function for testing cabinet and floor panel connections
- Controlling the ARL-500 board and ADrive speed controller from any point with a hand-held terminal connected to the CANbus line
- Emergency alarm siren (with buttons on the cabinet and on the bottom of the well)
